THE JARVIS MODEL 500HC

PNEUMATICALLY POWERED HOCK CUTTER FOR HIND BEEF HOCKS AND SOW HOCKS.

- The 500HC quickly and cleanly cuts rear beef hocks through the joint, and is an effective hock cutter for sows.
- Inexpensive - no hydraulic power unit.
- Double acting air cylinder for reduced maintenance - no springs.
- Lightweight for easy handling.
- Anti-tie down controls for operator safety.

SPECIFICATIONS
Pneumatic Drive
Operating pressure 90 PSI 6.1 bar
Air Consumption (per Cycle) 1.0ft.3 .03m3
Cutting force 2400lb.-f 10.7 kN
Cutting Cycle Time 1.5sec
Control Handles
Pneumatic Dual Anti-tie Down 90 PSI 6.1 bar
Blade Opening
-- At Tips 3.7 in 95mm
-- Widest 4.5in 114mm
Overall length 34 in 864mm
Weight 34lbs. 15.3 kg

EQUIPMENT SELECTION AND ACCESSORIES / ORDER NUMBER

Model 500HC 4023007

Air Hose length 15ft / 5m 1059004

Air Filter/Regulator/Lubricator 3022003

Balancer 4042003

Blade 1023013

The Jarvis Model 30CL series-- fore and hind beef hock/horn cutters.

THE JARVIS MODELS 30CL-1 AND 30CL-2

ELECTRIC-HYDRAULIC POWERED (30CL-1)AND PNEUMATIC-HYDRAULIC POWERED (30CL-2) FORE AND HIND BEEF HOCK AND HORN CUTTERS.

- Used for front and hind beef hock cutting through the bone or joint. Also an effective beef dehorner.
- With a 1.5 second cutting cycle (30CL-1) or a 4 second cutting cycle (30CL-2), it is a high production, high performance tool - used extensively for the most demanding applications.
- Best possible hygiene with updated, virtually all stainless steel construction - minimal corrosion problems.
- Small and lightweight for better handling and ease of use.
- Robust construction, including ground solid stainless steel blades, for long trouble-free life.
- Anti-tie down controls for operator safety.
-Meets national and international requirements for safety and hygiene.

SPECIFICATIONS FOR ELECTRIC-HYDRAULIC DRIVE UNIT

MODEL 30CL-1
Cutting Force 9900lb f 44kN
Cutting Cycle Time 1.5 sec
Control Handles -
Pneumatic Dual Anti-tie Down 50 PSI
Blade Opening
-- At tips: 4.0 in 102 mm
-- Widest: 5.75 in 146 mm
Overall Length: 32 in 813 mm
Weight: 38 lbs 17.2 kg

FOR ELECTRIC-HYDRAULIC POWER UNIT
Motor Power: 5HP 3728W
Operating Voltage
230/460V, 3 Phase, 60 Hz (other voltages and 50Hz available)
Hose Length: 15 ft 5m
Oil Capacity: 20 gal 76L
Overall Dimensions: 30x16x345 in 762x406x864 mm
Weight (without oil): 178 lbs 81 kg

SPECIFICATIONS FOR THE PNEUMATIC-HYDRAULIC UNIT

MODEL 30CL-2
Cutting Force: 12375lb f 55kN
Cutting Cycle Time: 4 sec
Control Handles -
Pneumatic Dual Anti-tie Down: 50 PSIBlade Opening:
-- At tips: 4.0 in 102 mm
-- Widest: 5.75 in 146 mm
Overall Length: 32 in 813 mm
Weight: 38 lbs 17.2 kg

FOR PNEUMATIC-HYDRAULIC INTENSIFIER
Operating Pressure: 125 PSI 8.5 bar
Air Consumption (per cycle @ 125 PSI: 1.98 ft3 0.056m3
Hose Length: 15 ft 5m
Oil Capacity: 3 qt 2.8 L
Overall Dimensions: 311x15x67xin 279x381x1702 mm
Weight (without oil): 80 lbs 36 kg

EQUIPMENT SELECTION AND ACCESSORIES
Electric-hydraulic Drive

Model 30CL-1: 4025013

Electric-hydraulic Power Unit (with hydraulic and control hoses): 4027049
Pneumatic-hydraulic Drive
Model 30CL-2: 402501
Pneumatic-hydraulic Intensifier (with hydraulic and control hoses): 4026014
Air Filter/ Regulator/ Lubricator: 3022003
Balancer: 4042004
Blade: 1023161

The Jarvis Model HTC-80 pneumatic-hydraulic powered toe cutter for hogs, sows, calves, and sheep.

--Robust, powerful tool for removing hog and sow toes or feet as well as cutting hocks on calves and sheep.
--Blade opening 3 in (80 mm).
--Fast cutting, only 0.5 seconds per cut.
--Clean cutting - no splinters, no bone dust.
--Special hanger - the HTC-80 can be used vertically or horizontally. Excellent in both positions; makes work easier.
--Blade guard is mountable on both sides for left or right handed operators.
--The HTC-80 is virtually maintenance free, for long trouble-free life.
--Lightweight - only 10.5 lbs (4.8 kg).
--Meets national and international requirements for safety and hygiene.

SPECIFICATIONS
Blade Opening 3.15 in 80 mm
Cutting Force 2450 lbf 10.9 KN
Cutting Cycle @ 2.6 gpm / 9.84 lpm 0.7 sec
Max Operating Pressure 2400 psi 163 bar
Overall Length 16 in 406 mm
Weight 10.6 lb 4.8 Kg
Control Handle Single / Hydraulic Single / Pneumatic
Air Powered Hydraulic Pump
Operating Pressure 6 - 8 bar
Hydraulic Pressure 96 - 128 bar
Air Consumption (@ 6 bar) 25 1 / cut
Oil Capacity 171
Overall Dimensions 395 x 200 x 535 mm
Weight (without oil) 18.5 kg

Equipment Selection and Accessories Order Number

HTC–80 Export 4025054
Domestic 4025061
HTC–80 w / Pistol Grip, Export 4025074
HTC–80 w / Air Trigger, Export 4025070
Air Trigger Kit 3022062
Pistol Grip Kit 3019175
Hydraulic Power Unit 4027093
Hydraulic Power Unit, Air Trigger 4027103
Balancer 4042004

THE JARVIS MODEL 425-16

ELECTRIC-HYDRAULIC POWERED HOCK CUTTER FOR SHEEP

--The 425-16 is best suited for sheep hock cutting before fleece removal. It is also suitable for beef tail removal and hog hock cutting
--Compact for easy maneuverability; robust for long, trouble-free operation
--Super fast cutting cycle combined with high cutting force means high performance for the most demanding applications
--Available with single 'D' handle and pistol grip for optimum operator comfort
--Anti-tie down controls for operator safety
--Constructed from corrosion resistant materials for optimum hygiene
--Meets national and international requirements for hygiene and safety

SPECIFICATIONS
Drive: Electric-Hydraulic
Capacity: 720 animals/hour
Cutting Cycle Time 5 sec
Control Handle - Electric Dual Anti-tie Down
(Proximity Switch), 12 V
Blade Opening
-- At tips: 23.5 in 60 mm
-- Widest: 29.5 in 75 mm
Overall Length: 18 in 460 mm
Weight: 13 lbs 5.9 kg

FOR ELECTRIC-HYDRAULIC POWER UNIT
Motor Power: 5.5 HP 4101 W
Operating Voltage 380/415, 3 Phase, 50 Hz   --other voltages and 50Hz available
Hose Length: 15 ft 5m
Oil Capacity: 13.2 gal 50 L
Overall Dimensions: 29x19x18 in/730x470x450 mm
Weight (without oil): 212 lbs 96 kg

Equipment Selection and Accessories Order Number

Model 425-16

with straight handles 4025072
with pistol grip handle 4025075
Electric-hydraulic Power Unit (for 720 animals / hour)
with control box and hoses, 460/230V, 3 Phase, 60HZ 4027049
Electric-hydraulic Power Unit (for 1,000 animals / hour)
with control box, hoses, and heat exchanger
460/23OV, 3 Phase, 60HZ 4027105
Spring Balancer 4042002
Blade 1023366

* For other configurations: please specify voltage, hertz, and intended country of operation when ordering.